Oase EAC Transformer 120 W, Operating Instructions Manual

Page: 9 / 91

- EN -
9
INTENDED USE
Exclusively use the EAC Transformer 120 W as follows:
• For the power supply of EAC-compatible OASE end devices.
• Operate in accordance with instructions. (→ Technical data)
The following restrictions apply to the EAC Transformer 120 W:
• Do not operate in or under water.
•
Observe the max. connected load. (→ Technical data)
– The connected load is calculated from the power consumption total of the indi-
vidual end devices connected to the transformer.
– For possible combinations of connectible end devices, check the transformer
product site at www.oase-livingwater.com .
ESTABLISHING THE EAC PLUG CONNECTION

B
How to proceed:
• Establish the plug connection: Insert the EAC plug connector in the EAC socket.
– Ensure that the lug enters both parts.
–
To release the plug connection press the pressure areas and pull apart the plug
connector.
SWITCHING ON AND OFF
• Switching on: Connect the unit to the mains. The unit switches on immediately.
• Switching off: Disconnect the unit from the mains.
CLEANING
Wipe the device with a damp cloth.
• Ensure that no moisture can enter the unit.