Oase Bitron Eco 120W, Commissioning

Page: 25 / 248

EN
25
Order of starting up steps
•
Switch on the pump.
•
Check all connections for leaks.
•
Connect the unit to the power supply.
–
The unit switches on with the last selected operating mode.
–
Switch on the unit if necessary. (
→
Switching ON/OFF)
•
Select the operating mode.
–
A garden pond is subject to a number of different influencing factors that encourage algae
growth (e.g. direct sunlight, nutrient contamination, natural planting). Therefore the suita-
ble Eco mode can only be individually determined.
–
Observe the information regarding the selection of a suitable operating mode. (
→
Selecting
the operating mode)
Switching ON/OFF
Function Proceed as follows Note
Switching on
Press .
•
The operating mode "50 %" is active.
•
The display indicates the current water temper-
ature.
•
The status display of the UVC lamps is lit.
Switching off
Press several times until
the UVC lamps turn off after
operating mode "100 %".
•
Switching sequence: 50 % – 75 % – 90 % – 100 %
– Off.
•
The display indicates OF .
•
In the event of an error, the corresponding error
message is displayed.