Oase BioStyle 115, Operating Instructions Manual

Page: 13 / 170

EN
13
Commissioning/start-up

If there is air in the telescopic intake, it may take up to 3 minutes for the pump to
deliver water.
• Switching on: Plug the power plug into the outlet.
–
The unit switches on immediately.
–
Lay the power supply cord so that a drip loop is formed and the lowest point is
below the socket. This prevents dripping water from entering the socket.
–
Set the desired flow rate.
•
Switching off: Pull the power plug from the outlet.
Form drip loop Adjust flow rate
BSE0003 BSE0013
Maintenance and cleaning
NOTE
Do not use aggressive cleaning agents or chemical solutions. These agents can dam-
age the housing, impair the function of the device and harm animals, plants and the
environment.

Clean the unit only with clean water and a soft brush or sponge.