30
- GB -
Pos: 79 /Gartentechnik/KDS Anlage TEKNA/Absatz 3 – Getaktete Dosierung (Eingang Frequenzsignal “TRIGGER” nicht aktiviert) @ 12\mod_1253631394014_121.doc @ 75049 @ 2
8.
Paragraph 3 – Timed Dosage (Frequency signal input “TRIGGER” not activated)
Programming
Operation
+
-
-
-
-
+
-
+
-
+
-
Tempo
Quantity 100ml
Delay 0.01.50
Interval 0.01.50
PROG
Time
Time g.hh.mm
Time g.hh.mm
Configuration
Pum functions
Configuration
Pum functions
-
-
Trigger Mode
Pause Input Mode
Disable
Restart Timer
+
-
-
Pause Input Mode
Restart Timer
-
Pause Input Mode
Freeze Time
Pause Input Mode
Pause Dosing
The pump doses a programmed quantity in ml. It is possible to set a
pump delay time (
Delay
) when the pump is started and an interval
between two successive dosings (
Interval
), as illustrated in the
diagram:
The
Delay
and
Interval
times are in dd.hh.mm (days, hours,
minutes)
The
Pause
input can be programmed in three different modes:
►
FreezeTime:
when the pause is activated, the system cuts out
the current time count and restarts it when the pause is
deactivated.
►
Pause Dosing:
with the pause activated, the system continues
to count time the and stops the dosing.
►
Restart Timer
: when the pause is activated, the system stops
the dosing and when the pause is deactivated the count starts
again from the beginning.
The dosage frequency can be modified while the pump is operating,
by pressing the
keys at the same time to increase the
frequency, or the
keys to decrease it.
Display during Operation
Display at start-up (MODE key)
Timer
F
F
F
7.0 ml
Liv Stop P 0%
Operating mode
•
Timer
•
Alarms and Level
statuses = level alarm
•
Flow = flow alarm
FLOW
sensor
status
Programmed value
•
Quantity in ml
Pump status
•
Dry = pump starting up
•
Stop = pump stopping
•
Restart = pump restarting
Value of dosing in
progress:
•
Percentage of
strokes/min max
Q.tà 20,0ml
20,0ml
P 100%
Modalità di funzionamento
•
Vengono visualizzati in
sequenza:quantità da
dosare, ritardo in g.hh.mm e
intervallo in g.hh.mm
Valore del dosaggio
•
Quantità
programmata in
ml
Valore della percentuale di
dosaggio, modificabile premendo
sui tasti + o -
Pos: 80 /Alle Produkte/Dummy_module/===== Seitenwechsel ===== @ 0\mod_1125648978015_0.doc @ 1631 @
Delay
Interv.
Quantity