18
DIRECTIONS FOR USE
Integrated heat level indicator
INTEGRATED HEATED TOP (OPTION)
Heating element locations
USING THE INTEGRATED HEATED TOP:
The table comes with the option for a fully integrated heated top pad. Simply press the heating indicator
located on the right side rail of the table to the desired heat level. The heat can reach up to 40
°
C (105
°
F).
Low
Medium
High
TROUBLESHOOTING:
1. HEAT IS NOT FUNCTIONING
Possible Causes:
• Plug is not properly plugged in
• Wall outlet is not working
• Damaged wires & terminals
Solutions:
• Ensure all power cords are properly plugged into a standard 120V or 230V wall outlet
• Ensure heating element connectors (2) are properly connected to control box.
• Check light indicator on front of the unit to ensure power is supplied. If not illuminated after
pressing it once, try plugging the table into another outlet
2. TWO & THREE BLINKING LIGHTS
Possible Causes:
• Two & three blinking lights on the control switch indicates that the heating element connector(s)
are not plugged in properly and/or damaged.
Solutions:
• Disconnect power supply to the control box (located on the underside of the table top) and wall
plug. Disconnect all heating element connectors from control box. Reconnect the heating ele-
ments first, then plug the power cord into the wall outlet
• If the problem continues, contact Customer Service at 717.235.6807
