SYMBOL IDENTIFICATION
INSTALLATION
The table comes completely assembled and ready to use. Plug the cord
into a functioning outlet that is rated for the table.
Arrange the power cord and control cords so that they will not create a tripping
hazard. Place the controls in a safe location where they are convenient and
accessible. Keep the controls out of the way of all table mechanisms.
LEVELING INSTRUCTIONS:
If Table Will Not Sit Flat on the Floor:
The table is equipped with Leveler Feet that adjust to level the table
on uneven floors. To adjust the Leveler Feet to suit common floor
differences you will need to use a
1
/
2
” open-end wrench or an
adjustable wrench. Adjust each leg individually in turn by adjusting the
height of each leveler foot until the unit rests level and steady. This
adjustment will not effect the function of the table.
CAUTION
The table weighs as much
as 300 lbs. (136 kg.)
DO
NOT
lift or move the unit
without using proper safely
procedures or equipment.
DO NOT
turn the table on its
side for any reason. To do so
could cause damage to the
base and
will
void the warranty.
There are no serviceable
items that require this action.
Never lift the table by grasp-
ing the table top as the
table top is not
designed to
hold the weight of the base
and you could damage the
table.
• Leveling Feet
When operating the table
controls be sure to observe all
cautions and warnings given
in the manual to prevent injury
to both operator and client.
IMPORTANT
1/2” Open-end Wrench
Leveler Foot
3
INSTALLATION
