OAKWORKS Clodagh Leo Instruction Manual Download Page 17

DIRECTIONS FOR USE

CARE & CLEANING

In order to maintain the quality and ensure the life of the table, here are 

some preventative steps that can be taken to protect the upholstery on the 

chair and accessories.
•  Protect your table and accessories with sheets and fleeces. 

  We offer both fitted sheets and thick fleeces that protect your upholstery  

  fabric against oil stains while offering comfortable 100% cotton flannel  

  softness to your clients. You can also preserve your face rest and  

  bolsters with 100% cotton flannel covers and fleeces.
•   Use only a mild solution of 4:1 diluted non-alcohol cleaner such as    

 409

®

, Fantastik

®

 or some other non-abrasive cleaner. A diluted 1/100  

  bleach solution for disinfecting can be used. Dry the table immediately  

  after cleaning to remove excess cleaning solution. Using strong cleaners,  

  such as alcohol, acetone, higher concentrations of bleach or other products  

  that contain high concentrations of these substances, can shorten the life  

  of your fabric, or discolor it. Note: Damage caused by these cleansers  

  will not be covered under the warranty.
•  Avoid extremes in temperature. Very cold temperatures can make your  

  fabric prone to cracking. Very high temperatures can cause the fabric to  

 stretch 

permanently.

•  Avoid exposing your products to direct sunlight for extended  

 

  periods of time. This can lead to fading and cracking of the fabric.
•  Use an anti-slip pad to prevent oil from reaching the upholstery   

  and to keep your sheets from slipping.
Caring for your table upholstery fabric involves more than just protecting it 

from general abrasions, cuts and punctures. We offer most of the products 

mentioned above.  

•  Use only a mild solution of 4:1 diluted non-alcohol cleaner such as 409

®

,  

 Fantastik

®

 or some other non-abrasive cleaner to wipe down the    

 metal 

and wooden surfaces. Apply with a damp (not wet) lint-free cloth.  

 Be 

sure 

excess liquid does not drip onto, or into,  any of the electrical  

  controls or mechanisms. Be sure that the unit is unplugged before   

  cleaning these areas. Wipe these areas carefully with a lint free cloth.
•  The electronic or manual powering mechanism of your table requires  

  no general maintenance or lubrication.
•  If the table will be out of use for an extended period of time, the    

  power cord should be unplugged from the receptacle. To prevent 

  inadvertent damage to the plug or cord, the cable should be coiled  

  and secured with a wire tie or rubber band. 
•  The wooden cabinetry of the equipment can be polished with any polish  

  approved for wooden surfaces. Spray, or pour, the polish onto a soft   

  cloth and be careful not to get it onto other surfaces.
•  Be sure to periodically tighten bolts to be sure they are secure. 

  Over time they may work their way loose causing joints to feel unsecure.

•  The face rest and table extender should be removed when not in use.   

  These items should be stored in a cool, dry place.

 HOW TO CARE FOR YOUR TABLE

CARE & CLEANING

CAUTION

Before cleaning with any  
liquid cleaner be sure to un-
plug the power cord from the 
power outlet. Do not operate 
the table in standing water.

 • 

Upholstery

  • Base & Controls

 

Be sure to read all 

 

 

cautions, warnings    

 

and instructions given   

in the manual to  prevent 
injury to both operator  
and client.

 • 

Accessories

15

Summary of Contents for Clodagh Leo





















Reviews: