When moving the table, place one person at each corner of the table. Have each person firmly grasp the
table top. When moving any piece of heavy equipment, bend at the knee and lift with your legs and not with
your back. Be aware and use proper, safe procedures for moving a table of this size to prevent injury to
yourself or damage to the table. We strongly recommend that a flatbed dolly that can hold the entire table
be used if moving the table involves any large distance.
CAUTION
MOVING THE TABLE
Before moving the table, disconnect the power cord from the power outlet. Secure the power cord
and all hand or foot controls before moving. The table weighs as much as 190 lbs. (86 kg.) Four
people are required to move the table safely. Do not use the table to transport a client.
DIRECTIONS FOR USE
Position at low height
TABLE LEVELING INSTRUCTIONS
1. Place the table in the location where you plan to use it.
2. Rock the table to determine if it is level with the floor. If
the table rocks back and forth at all, the foot that clears
the floor when you rock the table will need adjustment.
3. Adjust the Leveler Foot by first loosening the locking
nut found just above the rubber Leveler Foot with the
1/2” open-end wrench.
4. Lower the adjustable rubber Leveler Foot until it meets
the floor snugly. Tighten the locking nut against the leg
of the table with the 1/2” open-end wrench to fix the
Leveler Foot in position.
5. Rock the table again to be sure adjustments have
stabilized the table. If necessary make any additional
adjustments in the same way.
11
