17
TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING
• Is the unit plugged in?
• Does the outlet have power?
• Check all connections of the control box, is everything seated securely?
• Does the height of the table work when you press on the foot pedal?
• Does the top work when you use the hand control?
IF THE TABLE WILL NOT CHANGE POSITION
CAUTION
The table weighs as much
as 300 lbs. DO NOT lift or
move the unit without using
proper safety procedures
or equipment. DO NOT turn
the table
on its side for any
reason. To do so could cause
damage to the base and
will void the warranty. There
are no serviceable items that
need this action.
IMPORTANT
Be sure to read all
cautions, warnings
and instructions given
in the manual to
prevent injury to both
operator and client.
• Check the outlet to be sure that it has power and that the power
cable is plugged in. Try each foot control and hand control to
see if any work. If any work, then possibly there is a loose connection
or a faulty controller.
• Unplug the power cable from the wall outlet.
• Make sure that all male and female connectors are firmly
pushed into each other. Even a slight misconnection can
cause a possible malfunction.
• Plug the unit back into the wall and check the controls again.
If none work, then contact customer service.
QUESTIONS TO ASK BEFORE CALLING CUSTOMER SERVICE
The Celesta Lift, Celesta Deluxe and Celesta PerformaLift tables have two lifting columns
that raise and lower the table. In addition, the Celesta Deluxe has two actuators that
allow the client to be positioned for both client and therapist comfort. Each of these
devices has a duty cycle of approximately 10%, meaning 2 minutes of operation within a
20 minute period. These devices have a thermal limiting switch to prevent overheating.
As the thermal limiting switch is engaged, the motion will slowly come to a stop. Since
there are 4 independent motion controls, the table may be able to go up but one of the
positioning motions may not work. Allow the device to rest and it will automatically
reset itself.
THERMAL LIMITING SWITCH
View complete warranty details at www.oakworks.com
WARRANTY INFORMATION
