OAKWORKS Spa Portal Light User Manual Download Page 2

PORTAL LIGHT OWNER’S MANUAL

1.  Have your client stand on the side of the chair and grasp the chair 

frame just above the chest pad for support.

2.  Have the client straddle the seat and place their far knee on the 

knee pad. 

3.  Your client can then gradually begin to sit down. Once seated, the 

client can put their other knee on the knee pad.

4.  You can then make the adjustments to the face and arm rests for 

proper client comfort and positioning.

1.  Holding folded chair as shown, move the horizontal bar down & 

insert the bar into locking arm. (Fig. 1 & 2)

2.  Wrap Velcro

®

 around inserted bar to insure locking. (Fig. 3)

3.  Loosen face rest knobs and insert face rest platform arms into the 

tubes on the back of the chest pad plate. (Fig. 4 & 5)

SETTING UP YOUR MASSAGE CHAIR

Page 1 of 2

1) Move horizontal  

    bar down

HELPING YOUR CLIENT ONTO THE CHAIR

2. Adjustment for optimal client comfort
 

A.  Release the CamLocks and knobs on the face rest (photo 4 & 6)

 

B.  Have your client lean forward into the chest pad, letting  

 

 

the chair support their weight. 

 

C.  Ask your client to hold onto the face rest and to pull the  

 

 

face rest toward them until their forehead rests comfortably  

 

 

on the pad. 

 

D.  Lock the CamLocks and tighten the knobs securely.  

 

 

Do not over tighten the knobs - too much force may  

  cause 

stripping. 

FACE REST ADJUSTMENTS FOR OPTIMAL CLIENT COMFORT

1. General Adjustment Information 

 

A.   Oakworks QuickLock™ face rest has virtually unlimited    

 

 

positioning options. Vertical adjustment is achieved by  

 

 

loosening the knobs, raising or lowering the face rest & then  

 

 

tightening the knobs (photo 4 & 5). Angle adjustments are  

 

 

achieved by unlocking the CamLocks & moving the face  

  rest. 

(Fig. 6 & 7)

 

B.   The locking cams on the face rest can be easily reversed  

 

 

to the other side of the chair if desired. Loosen the knobs,  

 

 

remove the face rest, reverse the rods & re-insert into the  

 

 

tubes. Tighten the knobs. (Fig. 4 & 5)

2) Insert bar into arm

3) Wrap Velcro

®

 to secure

6) CamLock™

7) Face rest positioning

4) Face rest knob

5) Vertical adjustments

Face rest

CamLocks

Arm rest

Arm rest buckle 

& strap

Horizontal bar & 

locking arm

Chest 

Pad

Seat

Knee 

Pads

Face rest 

knobs

Personal item 

storage shelf

Reviews: