Oakton pH 310, Operating Instructions Manual

Page: 14 / 24

pH 300 meter set up mode
27 26
Advanced set-up mode overview
P3.0: Viewing electrode data
In pH measurement mode:
• P3.1: pH electrode offset
• P3.2: pH electrode slope
In mV (or relative mV) measurement mode:
• P3.1: relative mV offset
P1.0: Memory clear
• P1.0 Clear all stored readings
P2.0: Viewing previous calibration data
• P2.1: First calibration point
• P2.2: Second calibration point
• P2.3: Third calibration point
• P2.4: Fourth calibration point
• P2.5: Fifth calibration point
Instructions on page 28
Instructions on page 36
Instructions on page 29
8.1
Instructions on page 30-31
P4.0: Unit configuration
• P4.1: Ready indicator on or off
• P4.2: # of calibration points: 2, 3, 4, or 5
P5.0: Reset to factory default
• P5.0: Reset to factory default settings
Instructions on pages 32-33
SETUP MEM
pH
SETUP
pH
SETUP
SETUP
MEAS SETUP
Press the SETUP key to enter Set up mode.
Press the
▲
and
▼
keys to scroll through sub groups.
MEAS SETUP
SETUP
pH 310 meter set up mode
P3.0: Viewing electrode data
In pH measurement mode:
• P3.1: pH electrode offset
• P3.2: pH electrode slope
In mV (or relative mV) measurement mode:
• P3.1: relative mV offset
P1.0: Memory clear
• P1.0 Clear all stored readings
P2.0: Viewing previous calibration data
• P2.1: First calibration point (plus time/date)
• P2.2: Second calibration point (plus time/date)
• P2.3: Third calibration point (plus time/date)
• P2.4: Fourth calibration point (plus time/date)
• P2.5: Fifth calibration point (plus time/date)
• P2.6: Sixth calibration point (plus time/date)-only
available when DIN buffer set is selected in P4.3
Instructions on page 28
Instructions on page 39
Instructions on page 29
Instructions on page 30-31
P4.0: Unit configuration
• P4.1: Ready indicator on or off
• P4.2: # of calibration points: 2, 3, 4, 5, or 6 (6th point
available for DIN buffer set only)
• P4.3: Select calibration buffer set: USA, DIN, or NIST
• P4.4: Select °C or °F
P6.0: Reset to factory default
• P6.0: Reset to factory default settings
Instructions on pages 32-35
Instructions on pages 37-38
SETUP MEM
pH
SETUP
pH
SETUP
SETUP
P5.0: Setting Clock
• Setting year
• Setting date (month/day)
• Setting time (hour/minute/second)
http://www.novatech-usa.com/Products/Laboratory-Equipment-Supply-Products Tel: (281) 359-8538 Toll Free:(866) 433-6682