and each LED should be just poking out of its hole neatly, albeit loosely. Align the LEDs if
they aren’t quite straight and solder each one in turn, trimming its leads nice and short
afterwards.
With panel removed once again, you can now fit the switches. The C&K PCB mountable
switch should fit tightly into its respective holes on the board. You may need to use a pair of
fine nosed pliers to help the flexible gold pins into the board holes.
Make sure the switch body is flat against the board. Now refit the front panel and make sure
the round switch barrel fits into its hole in the front panel. Now solder all the pins on the
switch including the securing pins to the front.
That completes the soldering of the front panel components.
14