Oakley DOUBLE TAP, Instruction Manual

Page: 6 / 108

4 | DOUBLE TAP INSTRUCTION MANUAL
a b
The timepiece has a locking screw-down crown for water
resistance. You must unscrew the crown before pulling it
out to the click positions that let you set the date and time.
The first click position is for setting the date. The second
click position is for setting the time.
To set the timepiece the first time (or to reset the date
and time after the battery is replaced), do the following:
1. Unscrew the crown from the case. Pull the crown out
to the first click position (a).
2. Turn the crown clockwise until yesterday’s date
appears.
3. Pull the crown out to the second click position (b).
4. Turn the hands clockwise until today’s date appears,
then continue forward until the current time is
reached. If the current time is in the afternoon or
evening, move the hour hand all the way around the
dial to pass 12 o’clock noon.
5. Push the crown back in. Gently turn the crown
clockwise while pushing it inward toward the case,
until it screws back into the case. Be careful not
to over tighten the crown, as this will damage the
mechanism.
To set the exact second, wait until the hand on the
second-counting sub dial (at the right of the main dial
face) reaches “60” before you pull out the crown to
the second click position (b). Set the time then wait
until the exact second is reached before pushing the
crown back in.
SETTING THE DATE AND TIME
Date
Crown
SWISS MADE