17
EN
Parent control and Automatic Power On
Instruction Guide
The STB is shipped with a default personal identification number (PIN).
The default PIN is
000000
. The PIN is required if you have enabled the
parental lock. To enable Parent Control:
1. Press MENU (
Ref.10
) on the remote control. The main menu will
appear.
2. Scroll across until ‘System’ is highlighted.
3. Scroll down to ‘Parental Guidance’. Select this option, and when
prompted input the password as
000000
, unless you have
previously changed the PIN to a different number.
4. From here, you can change the age limit for programs. Once you
have selected an age limit, watching any channel which is marked
beyond this will require the PIN.
Automatic Power On/Off and Sleep
Follow this procedure to set the STB to switch on and off at specified
times.
1. Press MENU (
Ref.10
) on the remote control. The main menu will
appear.
2. Scroll across to select ‘Time’. Select Power On/Off. From here, you
can set the STB to switch on and switch off at specified times. To
do this, select ‘Enable’ or ‘Disable’ for ‘Power On’ and ‘Power Off’
according to your preference. Select your preferred Power On and/
or Power Off time(s) by highlighting the time and typing in your
selected time using the number keypad (
Ref.20
).
You can also set the STB to sleep after a certain amount of time
(between 1 and 12 hours) by selecting ‘Sleep’ under ‘Time’.
