Oakcastle SB-200, User Manual

Page: 9 / 28

9
EN
Selecting a channel
Follow one of the methods below to switch channels.
Press up or down on the navigation controls ( Ref.11 / Ref.14 ) to move to the next or
previous channel.
If you already know the channel number, enter the number using the number
keypad (
Ref.20 ) and then press OK ( Ref.13 ) or wait for 2 seconds.
Press OK ( Ref.13 ) on the remote control. This will display the channel/radio station
list.
Press up or down until the channel you want is highlighted, and then press OK
(
Ref.13 ).
Press the EPG button ( Ref.33 ), select the channel you want from the list, and press
EPG ( Ref.33 ) again.
NOTE: Press the RECALL button ( Ref.21 ) to return to the last channel or station
played.
Selecting a radio station
Press TV/RADIO ( Ref.36 ) to enter radio mode, then enter the number. (For
example, 201 is the number for ABC Jazz).
Press OK (
Ref.13 ) to display the station list. Press up or down until the channel you
want is highlighted, and then press OK ( Ref.13 ).
NOTE: The STB uses the Logical Channel Numbering system (LCN) by default.
Secondary channels can be selected by pressing the primary number followed by
another number. (For example, pressing 2 gives you ABC1, and pressing 22 gives
you ABC2).
BASIC OPERATIONS