EN
10
FM Mode
Ensure the radio antenna
(Ref.15)
is fully extended before using the unit in FM Mode
to scan/play radio stations.
1.
Press the ‘Mode’ button on the unit
(Ref.6)
or press the ‘Mode’ button on the
remote control
(Rem.2)
repeatedly to change the mode into ‘FM’.
2.
While in FM Mode, press the Play/Pause button on the remote control
(Rem.6)
to start automatically scan for FM radio stations available at your location. Once
the scan has been completed the radio stations found will be automatically
saved.
3.
Press the 'NEXT' or 'PREV' buttons on the remote control
(Rem.5, Rem 10)
or
the 'NEXT' or 'PREV' buttons on the unit
(Ref.8 and Ref.10)
to select the radio
stations.
4.
Press and hold the 'NEXT' or 'PREV' buttons on the remote control
(Rem.5,
Rem.10)
for 2-3 seconds or the 'NEXT' or 'PREV' buttons on the unit
(Ref.8 and
Ref.10)
to tune up or down the frequency band by 0.1MHz.
FM Mode
