Oakcastle CD-150, User Manual, Page: 10 / 16

10
EN
Troubleshooting
Troubleshooting
Problem Reason Solu on
Cannot be turned on Switch is not turned on. Press the ON/OFF bu on.
HOLD is turned on. Press the HOLD bu on.
The ba ery is exhausted. Charge the ba ry.
The player is damaged. Please contact Oakcastle Tech Support.
Cannot read discs The disc is installed incorrectly. 1. Make sure the label side of the
disc is facing up.
2. Ensure disc is inserted fully.
The disc cannot be recognised. The player is only compa ble with CD,
CDR, MP3 & HDCD
The disc is dirty or damaged. 1. Make sure the disc is not heavily
scratched or damaged.
2. Wipe the disc gently from the
centre towards to the edge of
the disc with a clean and so
cloth.
3. Try another disc to check if the
disc is faulty.
The loader is dirty. Wipe the lens gently with a degreasing
co on swab.
Cannot charge ba ery There is no current at power
outlet. Make sure the power outlet is working.
The plug is not plugged in
correctly. Make sure that the two plugs of the
power cords are connected correctly.
The charger is damaged. Replace a charger with one that matches
the original speci
fi
ca on (DC5V/1A).
The player is damaged. Please contact Oakcastle Tech Support.
NOTE: While charging, make sure the
Power Source and the Charging Voltage
are DC5V/1A. Excessive voltage input
may cause machine overload damage.
Automa cally skips parts of
the contents of the disc
The player has MODE func on
(Repeat, Repeat All, Random
Play& Preview Play). Please ensure Preview Play MODE is o
ff
.
Noisy & Screaming when it
plays Usage me of the disc may be
too long, so the disc is not
smooth. 1. Make sure the disc is not heavily
damaged.
2. Wipe the disc gently from the
centre towards to the edge of
the disc with a clean and so
cloth.
3. Try another disc to check if the
disc is faulty.
4.
If there is a scratching sound
from inside of the CD player
this might be caused due to the
CD not being inserted correctly. Please change to another disc, and do
not use the other one again.