Specifications
Input: RCA
Output: 1 pair Unbalanced RCA (single ended) , 1 pair Balanced XLR
Input impedance: 22 Ohm – 47 kOhm (selectable in 8 steps)
Input capacitance (without additional switched capacitance): 100 pF
Input sensitivity: 200uV – 20 mV
Gain: 40 – 80 dB (2 VRMS output at 1 kHz)
THD: 0.005 % (1 kHz)
Signal to Noise Ratio
MM cartridge: >107 dB A-weighted, input shorted
MC cartridge: > 85 dB A-weighted, input shorted
RIAA linearity: +/- 0.2 dB (20 Hz – 20 kHz)
Output impedance: 50 ohm
Nominal output: 2 VRMS
Maximum output: 10.5 VRMS
Power consumption: 5 W
Dimensions: Preamplifier W 210 x D 183 x H 95 mm, 2.3 kg
Power Supply W 114 x D 130 x H 63 mm, 1.25 kg
Mains Fuse: 500mA slow blow
Shipping Weight 5kg
All technical specifications are subject to change without prior notification.
Warranty
OAD Ultrafidelity products are covered by a 3-Year Limited Warranty. This Limited Warranty
initiates from the date of purchase, and is limited to the original purchaser. Outside
Australia, the authorized importing retailer or distributor has accepted the responsibility
for warranty of OAD Ultrafidelity products sold by them. The specific terms and remedies
for fulfilment of the Limited Warranty may vary from country to country. Warranty service
should normally be obtained from the importing retailer or distributor from whom the
product was purchased. In the unlikely event that technical service beyond the ability
of the importer is required, OAD Ultrafidelity will fulfil the terms and conditions of the
Limited Warranty. Such product must be returned at the purchaser’s expense to the OAD
Ultrafidelity factory, along with a photocopy of the dated purchase receipt for the product,
a written description of the problem(s) encountered, and any information necessary for
return shipment. The cost of return shipment is the responsibility of the purchaser.
