4
5
Installing the battery
You will receive the new battery
partially charged. So before
you start using your Xda Stellar
you will need to fully charge
the battery.
Charge the battery by plugging
in the AC adapter plug to an
electrical outlet. Plug the USB end
to the sync connector port at the
bottom of the device.
The battery will be fully charged
after about three hours.
To install the battery, slide the
back cover of your Xda Stellar
upward to remove it. Place the
battery in the slot and replace
the cover.
To turn the device on or off
It’s easy. Just press and hold the
POWER button for about three to
five seconds. This will turn your
Xda Stellar on or off. You’ll see a
message on the screen when it’s
switching off. Tap
Yes
to turn off
the device.
To enter information
Your Xda Stellar offers various
options to input information
onscreen. It also has a slide-out
QWERTY keyboard.
