Install in just 3 steps –
It‘s this easy:
Cabling your œ HomeBox 6641:
the connection options
Below you will find an example showing the cabling of your œ HomeBox 6641.
Connect the equipment accordingly.
TAE socket
Splitter
The œ HomeBox is connected
directly to the telephone socket
(German TAE socket); no splitter is
necessary.
Mains
socket
Integrated DECT
LAN cable
USB storage device
Analogue phone
DECT phones
Computer
DECT
buttons
Prepare
the installation
Connect the enclosed DSL cable to
your home telephone socket (middle
socket) and connect it to the DSL
socket on the œ HomeBox. Now
connect the desired telephones as
shown in the figure below. Then
connect your œ HomeBox via the
yellow LAN cable to your PC or
make a WLAN connection (see
below „WLAN initial setup“).
Switch on the œ HomeBox.
1
3
Start surfing and
make calls
Your œ HomeBox 6641 is
now configured for access to
the Internet and telephony.
If necessary, configure the
connected telephone via the
phone menu. At the time of
delivery, all connected tele-
phones ring for incoming calls.
2
Internet connection
Open an Internet browser via
the device connected to the
œ HomeBox and go to
o2.box
or
192.168.1.1.
The device wizard,
which now opens automatically,
helps you to configure the Internet
connection as well as to unblock
the connection. Further information
can also be found in the manu-
al, which can be downloaded at
www.zyxel.com/de/de/support/
o2_homebox_6641.shtml
more information / подробнее / daha fazla bilgi
Visit our website at http://o2.de/hilfe/o2homebox2 for a short guide in
English/Turkish/Russian. Here you will find the first steps to set up your
œ HomeBox 6641 as well as the installation video for the œ HomeBox 6641.
Чтобы ознакомиться с краткой инструкцией на русском языке, посетите наш сайт
http://o2.de/hilfe/o2homebox2. В ней содержится информация о настройке О
2
HomeBox 6641,
а также видеофайл по установке устройства О
2
HomeBox 6641.
İngilizce/Türkçe/Rusça dillerinde bir kısa kılavuz için http://o2.de/hilfe/o2homebox2
adresinde bulunan web sayfamızı ziyaret edin. Burada œ HomeBox 6641 kurulumu
ile ilgili ilk adımları ve œ HomeBox 6641 kurulum videosunu bulabilirsiniz.
1.
Switch on the WLAN-function on your terminal (PC,
Smartphone, Tablet etc.) and make sure that the WLAN-
function is also activated on your œ HomeBox (WLAN-LED
is lit). Otherwise, please activate it by pressing the button
above the WLAN LED.
2.
Now connect your device to the œ HomeBox device: This procedure is different for different operating systems
(Windows, Android, Mac OS, Linux, etc.). Please refer to your device manual.
3.
Select the wireless network from your œ HomeBox 6641. You will find the name
of the network (SSID) and the network key (WPA2 key) on the name plate on the
back of your œ HomeBox 6641
.
4.
Click ‘Connect’ and enter your WLAN network key
(WPA2 key).
5.
Alternatively, scan the QR-Code for an easy
initial WLAN set-up and to create a connection.
6.
The WLAN connection has now been completely set up.
WLAN/WPS
buttons
Setup by WPS
WPS (Wi-Fi Protected Setup) allows you to easily and quickly connect new WLAN devices to your wireless home network.
For this purpose, the terminals to be connected must support the WPS function.
1.
Press the WLAN button of the œ HomeBox for about 10 seconds. The WLAN LED starts to flash green, continuously.
2.
Now activate the WPS function on the WLAN device within 2 minutes. Observe the operating instructions for
the corresponding device.
3.
After the WLAN connection has been successfully established, this is indicated on the WLAN device, and the WLAN LED
of the œ HomeBox is lit permanently or irregularly (during data transfer).
WLAN Initial Setup
Integrated 2,4 GHz
and 5 Ghz WLAN
ISDN phone
