Page
8
Ceramic Sphere Placement
(See Figure 1, 2, 3 and 4)
Figure 1.
Pour the lava granules into
the burner support.
Figure 2.
Place the larger rocks
allowing gaps for proper
air flow.
Figure 3
Add the medium spheres at the
corner and one small sphere in
the center.
Figure 4.
Add the smaller spheres as
illustrated below
Figure 3.
Lay the smaller stones on top
of the larger stones allowing
gaps for proper air flow.
Figure 1.
Pour the lava granules into the
burner support covering the
burner completely.
Figure 2.
Place the larger spheres evenly
over the edge of the burner
CERAMIC ROCK AND SPHERE MEDIA PLACEMENT
CAUTION: BURN HAZARD. CERAMIC ROCK AND SPHERE MEDIA.
WILL REMAIN HOT FOR SOME TIME AFTER USE.
YOU MUST MAINTAIN THE LAYOUT AS SHOWN TO ENSURE PROPER OPERATION OF YOUR FIRE PIT.
IF YOU NEED TO REPOSITION ANY MATERIAL TO MAINTAIN THE PROPER LAYOUT, USE HEAT
RESISTANT GLOVES OR ALLOW MATERIAL ADEQUATE TIME TO COOL BEFORE HANDLING.
Ceramic Rock Placement
(See Figure 1, 2 and 3)
