1.5 USEE HELMET ADAPTER
The installation of the helmet adapter
should be performed at room temperature.
1. Position the adapter on the very
edge of the front side of the helmet.
Make sure the slot of the adpater
stays parallel to the helmet‘s edge.
Ahe adpaters are marked with the
following designations:
- A1R for ABUS helmet Game Changer
- A2R for ABUS helmets Aventor &
Viantor
2. Marke the position of the adapter with
a removable pen or strip of tape.
3. Remove the foil of the sticker and affix
the adapter to the marked spot.
Now press the adapter tightly to the
helmet.
Please make sure of the correct
orientation, the positioning can not
be adapted afterwards.
Full strength of the sticker will be rea-
ched after 30 minutes.
4. Slide USEE onto the helmet
adapter.
8 | 20
o-synce mobile | Manual
