O-Mac MR 700, Operator'S Manual

Page: 50 / 76

50
VII. Handling and transport
DANGER!
Before proceeding, read and understand the . chapter. i „SAFETY. • INSTRUCTIONS” in its
entirety.
With the motor off, the machine can be moved by hand by pushing or pulling it from the
handlebar.
LIFTING:
DANGER!
Fit all the guards depending on the type of the tool.
VIII. Storage
When the machine is not going to be used for long periods of time, it is essential to protect the
tool with anti-corrosion and antioxidant substances.
Clean the machine of leaves and/or dirt before storage.
DANGER!
Remove the fuel from the tank and close
the tap (if present).
Park the machine on flat ground, removing the ignition key (if present) and/or spark plug cap.
DANGER!
Protect the sharp parts and cover the machine with protective sheets if necessary.
Fit all the guards depending on the type of the tool.
IX. Periodic maintenance
DANGER!
Before proceeding, read and understand the chapter “SAFETY INSTRUCTIONS” in its entirety.
Keep all nuts, bolts and screws tightened to ensure safe operation of the machine and/or
interchangeable equipment in safe conditions.
9.1 Cable adjustment
Forward lever:
Machine movement must begin when the forward lever exceeds half of the stroke as shown in the
figure.