NZXT. 4
2. Pull the side panel to release it
Releasing the side panel
Motherboard Installation
The NZXT Hush supports the following motherboard: ATX, FLEX
ATX, MINI ATX, and MICRO ATX. The Index for the standoff holes
are as follows. ( Imprinted on the motherboard tray are serial
numbers that match certain motherboards )
A1~A9 ATX
F1~F6 FLEX ATX
M1~M9 MINI ATX
U1~U9 MICRO ATX
In order to install your motherboard go through the following steps:
1. Lay your case on its side
2. Match the standoff holes with your motherboard and
proceed to screw in the standoffs.
3. Using a screw driver, secure the motherboard onto the
standoffs ( Note: If you find that some holes are unused, this
is normal, this case is made to support for many
motherboard sizes )