7.1.1 Standard menu
In normal operation of the meter, the standard menu is active. The energy value of the
active tariff is displayed (standard display). Pressing the button briefly switches to the
next menu item. At the end of the standard menu it is possible to switch to test mode, the
address menu
or to edit mode
by holding down the button. The ability to switch to
another menu/mode is indicated by the word "Go" on the display. When the button is
held down for a longer time (> 5 s) the display jumps from any position of the standard
menu back to the standard display. This happens whenever the button is not pressed
within a period longer than 5 minutes.
S
= short actuation (t
actuation
< 2 s)
21
= long actuation (2 s
≤
t
actuation
< 5 s)
L
Standard menu
Menu item
Display
Button
(Pressing button switches to
next menu item, unless
otherwise indicated)
Standard display,
active tariff
or
Display test
or
Tariff 1,
positive active energy
or
Tariff 2,
positive active energy
(if configured)
or
Tariff 1,
negative active energy
(if configured)
or
Tariff 2,
negative active energy
(if configured)
or
S
L
S
S
L
L
S
L
S
L
S
L
Continued on next page
1
only for meters with an electric interface
2
only for non-calibrated meters and meters with edit mode enabled
