Nytech DC-8200
Important Notice
2 - English
- Only use this device with the supplied rechargeable batteries (Ni-MH
1.2V, size AA) or any equivalent models or standard batteries in order to
avoid overheating, deformation of the cover, fire, electric shocks,
explosion and other dangers.
- Unplug the charger from the wall outlet before removing any batteries
from the charger.
- Also, when there is the possibility of thunderstorms, pull the charger from
the wall outlet.
- Never try to heat, disassemble or short-circuit the rechargeable
batteries. Do not throw the rechargeable batteries in fire.
Warning: Notice concerning separation from the mains
In order to completely disconnect the charger from the mains, pull it out
from the wall outlet. The wall outlet where the device is connected must be
easy to access so that the charger can be pulled out quickly in case of
emergency. Pull the charger out from the mains when you will not be using
it for a long while (e.g. when going on holiday) in order to avoid the danger
of fire. Do not hold the charger with wet hands.
The device is not for use in rooms with a high temperature or humidity and
must be kept free of dust. Position the Nytech DC-8200 on a stable, flat
surface and do not place any objects on the device.
Always make sure that:
- no direct heat sources (e.g. heating) can affect the device;
- no direct sunlight or bright artificial light reaches the device;
- contact with spray and dripping water and abrasive liquids must be
avoided and the device should never be operated near water, and it
must especially never be immersed (do not place any objects filled with
liquids such as vases or drinks near the device);
- no fire sources (e.g. burning candles) are placed on or near the device;
- no foreign bodies are introduced into the device;
- the device must not be subject to any great temperature changes as this
may cause moisture through condensation;
- the device should not be subject to excessive shock and vibrations.