SETUP
OPERATION
Connecting your HDMI Repeater to your device
1.
Identify the INPUT/OUTPUT connections of the HDMI Repeater.
2.
Connect the HDMI cable from the OUTPUT port of the HD source device to the
HDMI Repeater’s INPUT port.
3.
Connect the HDMI cable from your display (monitor or TV) to the OUTPUT port of
the HDMI Repeater.
4.
Use your hand or a screwdriver to tighten the screws on the HDMI Repeater to
the HDMI cables.
5.
Connect the power adapter to the DC 5V INPUT on the side of the HDMI Repeater
and plug into a standard outlet.
6.
Once the connection is complete, the GREEN LED will light up.
7.
If the RED LED and the GREEN LED are both on, please check your connections
and try again as the RED LED indicates an improper connection.
NOTES:
•
For an optimum performance, please be sure that the total length of the HDMI
cables does not exceed 165ft. If the cables are too long, the image will not transmit
to your HD display.
•
The NRHD300 is an HDMI repeater. Please connect the NRHD300 closer to the
HD display.
•
The NRHD300 only supports one direction signal stream. Please follow
connection instructions.
•
Only use the supplied power adapter with the NRHD300.
INPUT
OUTPUT
ADAPTER
HD DEVICE
HDTV
CONNECTING TO YOUR DEVICES
Ex: Blu-ray player
- 4 -
