Q-Code User Manual
Ver. 7.0 2021/11/30
243
4.24.4 LEDStr_Brightness
This command is for adjusting the brightness of LED string, n=0 ~ 15.
Note: NY4 / NY5 / NY5+ / NY6 / NY7 / NY9Tdo not support this command.
Ex.
TR1: LEDStr_Brightness(15)
; Set the brightest luminance of LED string.
4.25 QFID Command
QFID Command
-
-
-
4.25.1 QFID_GroupID(Ri)
Scan all the QFID Group. Ri[7:0] is the state of Group. When the corresponding bit shows 1, it means
the tags of corresponding Group is detected. 0 means un-detected.
Note: NY4 / NY5 / NY5+ / NY6 / NY7 / NY9T do not support this command.
4.25.2 QFID_TagId (GroupID, Rl:Rk:Rj:Ri)
Scan all the Tag states.
GroupID:
specify Group ID.
Ri
is the state of Tag0 ~ Tag3. When the corresponding bit shows 1, it means the corresponding Tag is
detected. 0 means un-detected.
Rj
is the state of Tag4 ~ Tag7. When the corresponding bit shows 1, it means the corresponding Tag is
detected. 0 means un-detected.
Rk
is the state of Tag8 ~ Tag11. When the corresponding bit shows 1, it means the corresponding Tag
is detected. 0 means un-detected.
Rl
is the state of Tag12 ~ Tag15. When the corresponding bit shows 1, it means the corresponding Tag
is detected. 0 means un-detected.
Note:
1. NY4 / NY5 / NY5+ / NY6 / NY9T do not support this command.
2. NY7 does not support GroupID parameter.
4.25.3 QFID_TagInput (ID, Ri)
Read the input state of 3 I/O pins on Tag.
GroupID:
specify Group ID.
