FUNCTIONALITY AND EQUIPMENT REQUIRED
OVERVIEW OF TECHNICAL EQUIPMENT REQUIRED
We recommend the following components:
INFORMATION ON THE RETURN PUMP:
• The maximum pump capacity of the Nyos® OPUS® G2
return pump must not exceed 2,000 l/h (530 gph). If this
is exceeded, the display tank could overflow!
INFORMATION ON AUTO TOP OFF SYSTEM
We recommend a separate auto top off system
• Water that evaporates in all areas of the system can
only be detected through a drop in the water level in the
return chamber. The sensor of the Auto Top Off system
needs to be installed in the return chamber.
• Because sea salt does not evaporate, only use fresh wa-
ter (RODI Water) as compensation for water lost through
evaporation.
• IMPORTANT:
As the refill tank is higher than the water le-
vel in the sump, please ensure that the refill water is not
beeing topped up even when the pump is turned off. This
can be realized by a de-aeration of the refill tube. Please
read instruction of respective manufacturer carefully.
Component
Recommendation für OPUS® 300
Place of Installation
Skimmer
Nyos
®
QUANTUM
®
120
Main filter chamber
Return Pump
Nyos® Viper 2.0 or
EcoTech Marine Vectra S
Return chamber
Light
2 x Ecotech Marine Radion XR 15W
Display tank
Flow
2 x Ecotech Marine Vortech MP10wQD
or 2x Aqua Illumination Nero 5
Display tank
Media reactor
Nyos
®
TORQ
®
Main filter chamber
Auto top off
Tunze Osmolator
Return chamber
Heater
100W
Main filter chamber
10
