Nyne TT
(1) Make sure that the speaker is in pairing mode.
(2) Enable Bluetooth on your device to be paired with the speaker.
(3) Select ‘Nyne TT’ from the available devices (enter the password
‘0000’ if necessary) to start pairing and connection with the
speaker.
(4) After successful connection, the Bluetooth indicator
turns solid
blue and the speaker beeps.
Tips:
This speaker supports automatic connection with a
previously paired device after power-off and power-on
again.
You can press and hold
for more than 2 seconds to enter
manual pairing mode. In this way, you can pair the speaker
with a new Bluetooth device.
You can press and hold both
+
and
-
for more than 10
seconds to clear all paired Bluetooth devices.
This speaker is Siri-compatible.
EN
(1) Connect an auxiliary audio device to the speaker through
the supplied 3.5mm audio cable.
(2) Play and control music on the audio device, and use
+/-
on the speaker to adjust volume if necessary.
Tip:
When the 3.5mm audio cable is plugged in, the
speaker switches to AUX IN mode automatically.
When it is unplugged, the speaker switches back to
Bluetooth mode and connects with the previously
paired device automatically. If no device is
available, the speaker enters pairing mode.
EN
Play music on your device paired and connected with
the speaker.
During music play:
• Press
+
/
-
to adjust volume.
• Press
to skip to the previous or next song.
When you make a call or there is an incoming call, you
can use the speaker as a speaker phone.
• When there is an incoming call, you can press
to
receive the call.
• During a call, you can press to end the call.
• When using Siri on your Apple devices, you can press
twice to enable Siri support on the speaker.
Tips:
Music play is paused during a call and resumed
automatically when the call ends.
You can press and hold
to disconnect the current
Bluetooth connection.
EN
Charge your mobile device through the 5V
USB charging socket.
EN
