Installation and Operating Instructions
Installation:
Installation should be carried out by a suitably qualified tradesman using
correct fixing for the wall substrate. No fixings are supplied with this product
to allow the correct fixing method to be selected for specific installations.
1)
Once the correct wall fixing has been selected.
2)
Offer grab rail up to correct location on the wall and carefully mark
the selected hole locations.
3)
Drill the holes in the wall of a diameter and depth recommended by
supplier of wall fixings.
4)
Always carry out a functional test after installation and report any
issues immediately.
5)
Please leave these instructions with the user.
Using this product:
ALWAYS check this product is fitted securely to the wall and shows no signs of wear or damage prior to use.
Please keep these instructions in a safe place for future use.
Cleaning and maintenance:
This product must be checked regularly by a qualified personnel to ensure that it is in perfect working order.
This product can be cleaned using only a very mild detergent. Do not use acidic, alkaline, chlorine based or
abrasive cleaning materials.
Warranty:
The standard of manufacture and quality control allows Nymas to offer warranties on all products. The W
symbol denotes the number of years covered if different to the standard 1 year warranty. Nothing is shown
on any product information sources if the product is the standard 1 year warranty. Where L appears this
means the product is guaranteed for life (terms and conditions apply).
Disclaimer:
Nymas pursues a policy of continuing improvement in design and performance of its products and
so reserves the right to change specifications without prior notice. The information contained on this
document was correct at date of issue and dimensions are provided as a guide only. Some variation may
occur due to manufacturing tolerances.
We accept no liability whatsoever for personal injury or damage to property that is or has been caused due
to incorrect assembly, installation, or use of this product. Failure to install / use this product in line with
these instructions will invalidate any warranty and may affect product safety.
3 x 6.5mm fixing holes
Rev PI_GR_XX_35_00