Installation and Operating Instructions
PI_
B-
105
_
Rev 0
0
Installation:
Installation should be carried out by a suitably qualified
tradesman using correct fixings
for the product
. Fixings
are not supplied with this product to allow the correct
fixing method to be selected per installation. Consult a
fixing manufacturer if unsure of which type of fixings to
use.
1.
Ensure that the correct wall fixings have been
selected before installation.
2.
Offer the unit up to the wall at the position
required.
3.
Mark the fixing hole locations.
4.
Drill the holes in the wall of a diameter
(9mm)
and
depth
recommended by supplier of wall fixings.
5.
Always clean any dust from installations off
the hinge mechanism especially. To ensure the
mechanism works smoothly.
6.
Always carry out a functional test after installation
and report any issues immediately. This includes
moving the unit through a number of cycles of use
to ensure it moves freely.
7.
Please leave these instructions with the user.
Using this product:
Always check this
product
is fitted securely to the wall and shows no signs of wear or damage prior to use. Fold down the
unit by lowering down gently. To fold the
product
up, slowly lift the frame up towards the wall until it is secured back against
the wall. Please keep these instructions in a safe place for future use. These instructions are available in braille if required.
Cleaning and maintenance:
This unit must be checked regularly by a qualified personnel to ensure that it is in perfect working order. This unit can be cleaned
using only a very mild detergent. Do not use acidic, alkaline, chlorine based or abrasive cleaning materials.
Disclaimer:
Nymas pursues a policy of continuing improvement in design and performance of its products and so reserves the right to
change specifications without prior notice. The information contained on this document was correct at date of issue and
dimensions are provided as a guide only. Some variation may occur due to manufacturing tolerances.
We accept no liability whatsoever for personal injury or damage to property that is or has been caused due to incorrect
assembly, installation, or use of this product. Failure to install / use this product in line with these instructions will invalidate any
warranty and may affect product safety.
Packaging:
This p
roduct
is supplied in plastic wrapping and cardboard carton to keep the product unsoiled until installation. Both are
suitable for recycling operations and should be disposed of in accordance with local recycling regulations.
Warranty:
The standard of manufacture and quality control allows Nymas to offer warranties on all products. The W symbol denotes the
number of years covered if different to the standard 1 year warranty. Where L appears this means the product is guaranteed for
life (terms and conditions apply).