WPR1500-BUCK MP Receiver V2.1 Reference Design User’s Guide, Rev. 0, 09/2016
18
NXP Semiconductors
Getting Started
Figure 26. Stopping at main() when running debugging
6.2.4
Downloading an existing WPR1500 project with CodeWarrior
To download an existing WPR1500 project with CodeWarrior, perform the following steps:
1. Set up the CodeWarrior.
As the WPR1516 chip is a new series chip for CodeWarrior, install CodeWarrior V10.6.4 with
update 5 or later. To install update 5 package successfully, check for an update to let CodeWarrior
install some essential components.
Because the receiver driver library is already included in the lib folder and platform folder of the
wireless charger application project, you can open the application project and build the applications
directly whenever the libwpr_lib.a is ready.
The configurations in MWPR1516_config.h are set for the BUCK board by default. To build this
project for the LDO board, change the macro definition BOARD_OUT_TYPE from #define
BOARD_OUT_TYPE OUT_TYPE_BUCK to #define BOARD_OUT_TYPE OUT_TYPE_LDO.
Then rebuild all the file in the project.
The demo applications workspace folder is located in:
<software_package>/build/wpr1500/cw/WPR1500_REF
2. Build a project.
Click the
Clean Project
button to clean project, and then click the
Build Project
button.
