NXP Semiconductors
UM11521
RDK01DB1563 getting started
5 Connecting and working with the setup
5.1 Connecting the setup
A video on the get started page shows how to connect a setup to your computer by USB.
There are two types of setup.
1.
Power supply setup
The TEA2016DB1519v2 demo board contains a TEA2016AATdev sample that can
communicate via I
2
C during operation. It is connected to the interface with a 3-pin
connection.
2.
IC programming board setup
Connecting a TEA2016DB1561 with a 6-pin cable provides reading or programming
for TEA2016AAT ICs. If a TEA2016AATdev IC version is used, connect the 3-pin
cable as well.
The switch on the interface selects the 3-pin or 6-pin connection.
Figure 8. Connecting the setup
UM11521
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2020. All rights reserved.
User manual
Rev. 1 — 19 November 2020
9 / 13
