NXP Semiconductors
UM11490
Feature Configuration Guide for NXP-based Wireless Modules on i.MX 8M Quad EVK
Step 4 - Start iPerf on the client
Iperf server is running and the system is connected to the external AP.
Run the following command to start iPerf on i.MX 8M Quad station as a client. The
command takes iPerf server IP address as an argument.
root@imx8mqevk:~# iperf -c 192.168.1.2 -u -b 50M -i 1
Command output example:
Connecting to host 192.168.1.2, port 5201
[ 5] local 192.168.1.3 port 55286 connected to 192.168.1.2 port 5201
[ ID] Interval Transfer Bitrate Total Datagrams
[ 5] 0.00-1.00 sec XX.XX MBytes XXX.X Mbits/sec XXXX
[ 5] 1.00-2.00 sec XX.XX MBytes XXX.X Mbits/sec XXXX
[ 5] 2.00-3.00 sec XX.XX MBytes XXX.X Mbits/sec XXXX
[ 5] 3.00-4.00 sec XX.XX MBytes XXX.X Mbits/sec XXXX
[ 5] 4.00-5.00 sec XX.XX MBytes XXX.X Mbits/sec XXXX
[ 5] 5.00-6.00 sec XX.XX MBytes XXX.X Mbits/sec XXXX
[ 5] 6.00-7.00 sec XX.XX MBytes XXX.X Mbits/sec XXXX
[ 5] 7.00-8.00 sec XX.XX MBytes XXX.X Mbits/sec XXXX
[ 5] 8.00-9.00 sec XX.XX MBytes XXX.X Mbits/sec XXXX
[ 5] 9.00-10.00 sec XX.XX MBytes XXX.X Mbits/sec XXXX
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Jitter Lost/Total
Datagrams
[ 5] 0.00-10.00 sec XXX.X MBytes XXX.X Mbits/sec X.XXX ms XXXX/XXXXX
(XX%) sender
[ 5] 0.00-10.00 sec XXX.X MBytes XXX.X Mbits/sec X.XXX ms XXXX/XXXXX
(XX%) receiver
iperf Done.
UM11490
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 2 — 29 January 2021
28 / 88
