UM10563
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2012. All rights reserved.
User manual
Rev. 1 — 9 August 2012
15 of 19
NXP Semiconductors
UM10563
Gaming suitcase demo system
To run the auto-demo:
1. Press ‘CPU_RESET’ button.
2. Press ‘F1’ button to run through automated routine. In this mode, all available LED
patterns and stepper motor patterns will run in a loop mode.
3. To end the demo, simply press the ‘CPU_RESET’ button.
To run in manual mode:
1. Press ‘CPU_RESET’ button.
2. Press ‘F2’ button to run through the first demonstration routine.
3. To cycle through the different demos, press the ‘F2’ button to move backwards
through the routines, or ‘F4’ to move forward. The ‘F3’ button lets the demo pattern
again.
4. To exit, press the ‘CPU_RESET’ button.
To check software revision:
1. Press ‘CPU_RESET’ button.
2. Press and hold ‘F3’ or ‘F4’ button to display software revision.
3. Press and hold ‘F3’ or ‘F4’ button again to display software build date and time.
4. To exit, press the ‘CPU_RESET’ button. (This is not necessary. Pressing F1 or F2
starts Auto or Manual demo mode.)
Fig 13. CPU_RESET and F1 to F4 buttons
019aac727