NXP Semiconductors UJA116 A Series, User Manual, Page: 39 / 56

NXP Semiconductors
UM11379
UJA116xA evaluation boards
The contents of the selected register, or register group, is displayed in the main window.
Register data can be edited in the top row in preparation for writing to the register. When
option Use Register Init Value is selected, the editor is initialized with the default values
at start-up and reset ( Figure 34 ). If this option is not selected, all bits will be 0 at start-up
and reset.
Actual register contents from a prior read access is shown in the bottom row.
Figure 34. Advanced options for register map
Register data is displayed in three formats:
• As a single hexadecimal value for the entire register
• In text format, when clicking on the question mark symbol
•
A color-coded button is provided for each register bit:
– red = 0
– green = 1
When the bit buttons do not fit on a single row (as in Figure 32 ), try de-selecting
checkbox Uniform Buttons (see Figure 33 ). The width of the buttons is then minimized
to fit the bit names ( Figure 35 ).
UM11379 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
User manual Rev. 1 — 23 April 2021
39 / 56