This guide briefly describes how to get
started using IAR Embedded Workbench
®
with IAR J-Link (Lite), USB-JTAG/SWD
debug probe for an ARM
®
Cortex
®
-M core
to run an example application on the
Freescale Kinetis K60N512 board.
For more detailed information, see the
IAR Embedded Workbench IDE User
Guide, and the C-SPY hardware debugger
documentation, which can be found on
the Help menu in the IAR Embedded
Workbench IDE.
Tower MCU board (TWR-K60N512)
• Kinetis K60N512 device (Cortex-M4)
• Capacitive touchpads
• Integrated, open source JTAG
• SD card slot, MMA7660 3-axis
accelerometer
• Tower plug-in (TWRPI) socket for expansion
(sensors)
• Touch TWRPI socket adds support for
various capacitive touch boards (key pads,
rotary dials and sliders)
• Tower connectivity for access to USB,
Ethernet, RS232/RS485, CAN, SPI, I²C,
flexbus
• Potentiometer, four LEDs, two pushbuttons,
infrared port
Tower Serial board (TWR-SER)
• USB host, device and OTG with mini-AB
connector
• RS232 and RS485 transceiver and single
DB9 connector
• 10/100 Ethernet PHY with MII and RMII
interface
• Eithernet connector with integrated magnetics
• CAN transceiver with 3-pin header
Tower Elevator board (TWR-ELEV)
• Power regulation circuitry, standardized
signal assignments
• Common serial and expansion bus signals
and side-mounting board
• RoHS, FCC/CE certifications
Features of the Kinetis
K60N512 Kit