NXP Semiconductors S32K116 EVB, Quick Start Manual, Page: 33 / 45

EXTERNAL USE 32
Debug Basics: Starting the Debugger
•
Debug configuration is only required once. Subsequent starting of debugger does
not require those steps.
•
Three options to start debugger:
−
If the “Debug Configuration” has not been closed, click on “Debug” button on bottom right
−
Select Run – Debug (or hit F11)
Note : This method currently selects the desktop target ( project. elf) and gives an error. Do
not use until this is changed.
−
Recommended Method : Click on pull down arrow for bug icon and select …_debug.elf
target