12
2.5 Connectors
The table below lists the connectors of the S32G-VNP-GLDBOX. Please refer to the schematic for more detail.
Table 6. The connectors of the S32G-VNP-GLDBOX
Part
Connector type
Description
Typical connection
J1
USB 2.0 Micro-AB
connector
Console port (UART1)
Connects to host computer.
J2
USB 2.0 Micro-AB
connector
Console port (UART0)
Connects to host computer.
J3
SD card slot
SD card slot
Connects to the SD card.
J4
USB 2.0 Micro-AB
connector
Supports USB 2.0 host/device
mode.
Host mode: Connects to OTG cable.
Device mode: Connects to USB-A to
Micro-B cable.
J5
2 x 13 connector
Connector for GPIO, ADC, LIN,
power supply interfaces.
Connects to the cable in accessories.
J6
2 x 20 connector
Connector for CAN and FlexRay
interfaces.
Connects to the cable in accessories.
J44
2 x 10 connector
SJA1110 JTAG header
Connects to the debugger.
J47
M.2 M-key slot
PCIe x2 M.2 slot with key M and
supports PCIe x2 (Gen3, Gen2,
Gen1) and PCIe x1 (Gen3, Gen2,
Gen1)
Connects to PCIe x2 module (size:
2242, key: M key, B+M key).
It is recommended to connect 2242
B+M key NVME SSD (such as
TOSHIBA RC100 240G, which has
been already tested on S32G-VNP-
GLDBOX).
If J47 is used, J56 is not available.
J48
2 x 10 connector
S32G274A JTAG header
Connects to the debugger.
J53
2 x 12 connector
Connector for 100BASE-T1
interfaces
Connects to the cable in accessories.
J56
M.2 E-key slot
PCIe x2 M.2 slot with key E and
supports PCIe x2 (Gen3, Gen2,
Gen1) and PCIe x1 (Gen3, Gen2,
Gen1)
Connects to PCIe x2 module (size:
2242, key: E key, A+E key)
If J56 is used, J47 is not available
J57
2 x 20 connector
S32G274A Aurora trace header
Connects to the debugger
J176 DC power jack
12 V power jack
Connects to 12V AC-DC power
adapter
P1
PCIe x1 socket
Supports PCIe x1 (Gen3, Gen2,
Gen1)
Connects to PCIe x1 EP module
