nxp.com/S12ZVM-EFP
5
STEP-BY-STEP INSTRUCTIONS
CONTINUED
3
Set Up DC
Power Supply
Connect power supply wires to the
DC power supply. Set the voltage at
12 V and the current limit to 20 A. Check
and make sure all connections are right.
4
Program
Example Codes
Open CodeWarrior and load example
projects. Power up the board. Open
FreeMASTER in the S12ZVM-EFP
Software Quick Start Package. Configure
the connected motor parameters
and other parameters in MCAT and
generate the “PMSM_appconfig.h” file.
Compile and program the project and
then connect the FreeMASTER with the
S12ZVM-EFP board. After that, you can
run the motor by using FreeMASTER.
For more details, refer to S12ZVM-
EFP Software User Guide (SWUG).
Power Supply
DC:
12 V
Current limit:
20.0 A
J3
J12
J13
J6
J4
J1
J7
J5
J11
J14
PWM/LIN
SCI
To
USB
FreeMASTER
Fuel Pump or
other BLDC/PMSM
Multilink