NXP Semiconductors
PT2001SWUG
PT2001 programming guide and instruction set
PT2001SWUG
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2019. All rights reserved.
User guide
Rev. 3.0 — 29 April 2019
72 / 153
jtsf
Description:
Configures the jump on subroutine to absolute location
The program counter (uPC) is handled such as the next executed instruction is located
into the destination address contained in one of the jump registers.
When jump to subroutine is called, the current program counter value (uPC) is stored in
the auxiliary register (aux) to handle the end-of-subroutine return.
The destination address defined by the op1 register is any of the absolute Code RAM
location.
Assembler syntax:
jtsf op1;
Operands:
•
op1 – One of the registers listed in the operand
Table 61. jtsf instruction format
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0
0
1
1
1
0
0
1
1
0
1
1
op1
1
0
1
