MPC8308NSG Quick Start Guide
15
8. Voice over Internet Protocol (VoIP)
This section describes the steps required to demonstrate the IP-PBX server (VoIP) capability of the Reference
Platform.
Follow the basic setup instructions as described in Figure 1.
Figure 12: NVR Settings
Open the browser and type 192.168.1.1 to access the homepage of the reference
platform.
On the homepage, go to Applications
IP PBX VoIP
users.
To create users:
a.
Click on
New
. Enter Under create Extension (Username) and password (Example: Type 3000 and 3000
respectively and click on
Save Changes.
b.
For additional users, repeat
step ‗4a‘ by creating Extension (Username) and password and click on
Save
Changes
and finally click on
Apply Changes
.
NOTE
You need to delete the pre-existing users and create new users as mentioned in step 4.
To delete users, click on the delete button you see corresponding to a user and click on
save changes.
The phone number of the IP phone is written on the phone. Use the number
corresponding to the phone in step 4.
Remove the power cords from the IP phones and plug them back in. Patiently
wait a minute for them to restart.
LAN port
