NXP Semiconductors
UM11623
PCA9959HN-ARD evaluation board
4.1 Kit contents
•
Assembled and tested evaluation board in an anti-static bag
•
Quick Start Guide
4.2 Assumptions
Familiarity with the SPI bus is helpful but not required.
4.3 Static handling requirements
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care
should be taken during transport and handling. You must use a ground strap
or touch the PC case or other grounded source before unpacking or handling
the hardware.
4.4 Minimum system requirements
This evaluation board requires a Windows PC workstation. Meeting these minimum
specifications should produce great results when working with this evaluation board.
•
PC with Windows 10 operating system
•
One USB port (either 3.0 or 2.0 or 1.1 compatible)
•
One of three EVK boards (MIMXRT1050-EVK, LPC55S69-EVK, 8MMINILPD4-EVK)
along with the associated firmware / GUI software
•
USB cable for power and data connection between PC and EVK board (if not included
in the EVK package)
UM11623
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 1 — 21 May 2021
4 / 32
