NXP Semiconductors OM-A5000ARD, Get Started, Page: 6 / 30

NXP Semiconductors
AN13256
Get started with EdgeLock A5000 support package
3.1 MCUExpresso EdgeLock A5000 examples
The EdgeLock Plug & Trust middleware includes a set of project examples that
demonstrate the use of EdgeLock A5000 in the latest Authenticator security use cases.
For MCU based projects the example can be either:
• Imported from the CMake-based build system included in the EdgeLock Plug & Trust
middleware package.
• Imported from the MCUXpresso SDKs made available for the MIMXRT1170-EVK , the
MIMXRT1060-EVK , the FRDM-64F and the LPC55S69-EVK MCU boards.
The CMake-based build system is briefly explained in Section 4.2 .
For the MIMXRT1170-EVK, the MIMXRT1060-EVK, the FRDM-64F and the LPC55S69-
EVK, a set of project examples can be directly imported from the board SDK package to
your MCUXpresso workspace.
These project examples offer a quick way to evaluate EdgeLock A5000 features, and its
source code can be re-used for your own implementations. The latest SDK packages can
be found in EdgeLock A5000 product website, under the
Tools & Software
tab, as shown
in Figure 2 .
Figure 2. MCU board SDKs with EdgeLock A5000 examples
Note: The MCU SDKs can be downloaded also from the MCUXpresso SDK Builder
website, but may not include all the EdgeLock A5000 project examples or the latest
version of them.
The NXP Plug & Trust middleware supports the A5000 Secure Authenticator and the
SE05x Secure Element product family through the SSS and se05x API. Table 3 lists all
examples supported by the A5000 Secure Authenticator when using the FRDM-64F
MCUXpresso SDK.
AN13256 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.
Application note Rev. 1.0 — 28 March 2022
6 / 30