NXP Semiconductors NTS0304EUK-ARD, User Manual, Page: 25 / 29

NXP Semiconductors
UM11762
NTS0304EUK-ARD evaluation board
Figure 17. Graphical interface – “Static” tab activated
The third tab is STATIC . Click on this tab and a new window appears (see Figure 17 ).
The upper part of the display shows the same settings for Set VCCA and Set VCCB as
in DYNAMIC tab.
In the center of the window is a chain of blocks connected with bidirectional arrows
indicating the data flow through the signal paths of the level translators. For each signal
path the data flow direction can be chosen for both sides (from Side A to Side B or Side
B to Side A) by enabling the corresponding checkbox.
8 Abbreviations
Acronym Description
DUT Device Under Test
EEPROM Electrically Erasable Read-Only Memory
ESD Electro Static Discharge
EVK Evaluation Board
GUI Graphical User Interface
I
2
C bus Inter-Integrated Circuit bus
IC Integrated Circuit
I/O Input / Output
LED Light Emitting Diode
PC Personal Computer
SPI Serial Peripheral Interface
USB Universal Serial Bus
Table 7. Abbreviations
UM11762 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.
User manual Rev. 1.0 — 27 May 2022
25 / 29