BL ID
Hardware Manual
Project Name: Integration Manual Project ID: 62743
5.2.
General functions
-
Reading/writing to/from NTAG I
2
C tag ic is possible with NFC mobile phone with android
application.
-
Explorer Board with NTAG I
2
C plus Antenna Board can communicate with NFC mobile
phone in distance up to 30 mm from the center of the NTAG I
2
C plus Antenna Board to
the center of phone NFC antenna.
-
Data transfer from/to NTAG I
2
C tag ic is possible in RF electromagnetic field (created from
NFC phone). Nonmetal material between phone antenna and NTAG I
2
C plus Antenna
Board has no influence to reading distance or reading reliability.
-
Reading/writing to/from NTAG I
2
C tag ic is very simple: user approaches his Connected
Tags Explorer Board with NTAG I
2
C plus Antenna board to NFC phone antenna. The
android application, called NTAG
I2
I2C Demo NFC, must be started on mobile phone. User
can turn on/off LEDs on NTAG I
2
C plus Explorer Kit (with android application) to
demonstrate communication with NTAG I
2
C tag ic or can press the switches on
Connected Tags Explorer Board (and see pressed switches on android application).
5.3.
Instructions for safe work, maintaining and care
•
Be careful not to damage the connectors, antenna, PCB, ICs and other connected
parts.
•
Because of the specifics of the device and the damage, only quallified staff, authorized
by the producer, are allowed to repair the device. All interventions of the unauthorized
person and mechanical damage means repealing of the guarantee.
SRSt Template 1.0
public
© NXP B.V. 2015. All rights reserved
Doc ID: DOC-XXXXXX
Doc Rev 1.00 Approved — 2015.09.01
15 of 18
