manualshive.com logo in svg

NXP Semiconductors MRF101AN, Quick Reference, Page: 4 / 4

Share
Download
NXP Semiconductors MRF101AN Quick Reference Download Page 4

www.nxp.com/MRF101KIT

© 2019 NXP B.V. 
All other product or service names are the property of their respective owners. All rights reserved.

Document Number: MRF101ANEKITQRC Rev. 0

Assembly notes:

•  Mount all SMT devices on PCB (device values are dependent on frequency  

of operation).

•  Make sure no solder blobs are on non-component side of board.
•  Trim leads of MRF101AN to shoulder.
•  Mount board onto baseplate.
•  Mount device using thermal grease, solder only after tightening device  

mounting screw.

•  Mount connectors and solder center pin.
•  Connect bias network if used.

For design examples go to www.nxp.com/MRF101AN-TSP

 

Summary of Contents for MRF101AN

Page 1: ...Quick Reference MRF101AN RF Essentials Kit Accelerate Your RF Amplifier Design with the Essential Components Kit...

Page 2: ...W THE MRF101AN KIT RF Output RF Input Drain DC Gate Bias Gate Bias 47 k 2 5 k Drain DC D temp comp 1N4148 thermally coupled to Q1 Figure 1 MRF101AN Board Connections Figure 2 External Temperature Comp...

Page 3: ...th a 50 ohm load capable of dissipating more than 100 W 3 Connect RF input to a 50 ohm source with RF off 4 Set gate bias to 0 V 5 Apply 40 to 50 Vdc to drain DC terminal Current should be 0 A 6 Adjus...

Page 4: ...MT devices on PCB device values are dependent on frequency of operation Make sure no solder blobs are on non component side of board Trim leads of MRF101AN to shoulder Mount board onto baseplate Mount...

Reviews:

No comments