5
www.nxp.com
Connect power supply to power
socket and micro USB cable to micro
USB port on the MPC-LS Processor
Module. Make sure the DS1 and DS2
LEDs for voltage levels 5V and 3V3
respectively are glowing on the board.
Connect the Power
Supply
Install the FTDI CDM v2.12.28 WHQL
driver as below:
Connect the micro USB cable from
MPC-LS Processor module to your
Windows machine.
Go to the Device Manager and right-
click the COM port detected and
select Update Driver Software.
Select Browse my computer for driver
software and select the FTDI driver
that has been downloaded.
Restart your machine.
Install FTDI Driver
1
2
STEP-BY-STEP INSTRUCTIONS
Open Tera Term on Windows PC.
Select the serial port to which the
micro USB of the MPC-LS Processor
Module is connected and click OK. Go
to Setup
Serial Port and select
115200 as the baud rate.
Setup Tera Term
Console
Press the LS reset button on the
MPC-LS Processor Module. Do not
press any key while the counter goes
down from 10 to 0. Enter “root” as
login and press Enter.
Reset the Board
3
4
The getting started IPCF application is
auto executed on login.
Application Startup
5