NXP Semiconductors MKL27Z128VFM4, Reference Manual

Page: 504 / 939

31.4 Memory map and register definition
LPTMR memory map
Absolute
address
(hex)
Register name
Width
(in bits)
Access Reset value
Section/
page
4004_0000 Low Power Timer Control Status Register (LPTMR0_CSR) 32 R/W 0000_0000h 31.4.1/504
4004_0004 Low Power Timer Prescale Register (LPTMR0_PSR) 32 R/W 0000_0000h 31.4.2/505
4004_0008 Low Power Timer Compare Register (LPTMR0_CMR) 32 R/W 0000_0000h 31.4.3/507
4004_000C Low Power Timer Counter Register (LPTMR0_CNR) 32 R/W 0000_0000h 31.4.4/507
31.4.1 Low Power Timer Control Status Register (LPTMRx_CSR)
Address: 4004_0000h base + 0h offset = 4004_0000h
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
R
0
W
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0 TCF
TIE TPS TPP TFC TMS TEN
W
w1c
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
LPTMRx_CSR field descriptions
Field Description
31–8
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
7
TCF
Timer Compare Flag
TCF is set when the LPTMR is enabled and the CNR equals the CMR and increments. TCF is cleared
when the LPTMR is disabled or a logic 1 is written to it.
0 The value of CNR is not equal to CMR and increments.
1 The value of CNR is equal to CMR and increments.
6
TIE
Timer Interrupt Enable
When TIE is set, the LPTMR Interrupt is generated whenever TCF is also set.
0 Timer interrupt disabled.
1 Timer interrupt enabled.
5–4
TPS
Timer Pin Select
Table continues on the next page...
Memory map and register definition
KL27 Sub-Family Reference Manual , Rev. 5, 01/2016
504 Freescale Semiconductor, Inc.